Morso 04, 06, 08, Squir...

Morso 04, 06, 08, Squirrel or Badger? I was fitting a Morso stove, a Morso Badger log burner. In Denbigh, an old school house, musty place with lots of books. Strange couple. Anyway, as I said, we were fitting a stove, a little one as far as I was concerned, by the size of the box. It had...

Example twin wall job: ...

...

Air gaps above and behi...

The air gap above a stove (between top of stove and closure plate or register plate) is not covered in Building regs. However it may be specified in the manufacturer’s fitting instructions so check this prior to buying the stove (it rarely is mentioned… Julian). As a rough...

Sump adaptor for clay p...

I have fitted “top hat connectors” successfully many times when presented with a flat surface and clay pot liner (assuming a successful smoke test as outlined in building regulations). However I have had a major problem with one recently – see below: Okay so this is...

Stove to flue to adapto...

Straight lengths of vitreous pipe can be cut down (e.g. if you think you need between 40cm and 65cm you could by a one metre and cut to length) Black vitreous pipe always fits into stove “tapered end downwards”. In other words the male is on top inserting into the female...